Posted by Giro on April 12, 2000 at 01:06:53:
In Reply to: Adjustment of drive belt posted by Vasilis Kalantzakos on April 11, 2000 at 21:04:56:
HI,about the drive belt, the pulleys are actually offset,I removed lower belt guard and front pulley cover ,then used a 4 ft level to line them up.The rear pulley is about 3/16 of an inch out further than the front.Almost a full notch on the swingarm.With the level square on the rear pulley,the front pulley is away from the level approx.3/16".In any case use a straightedge and dont trust the notches they ARE WRONG! ride safe,GIRO